Fixing Floor Tiles With TileFixo
If your tile is not fixed right, a hollow space will emerge between the tile and the surface. In such cases, the tiles can crack or break under pressure, which may spoil the look of your home and cause problems. To prevent this, you should use UltraTech Tilefixo, which gives you a stronger bond. Let us understand the right way to fix a tile with Tilefixo.
1
1
Start by cleaning the surface where you are going to fix the tiles and wet it.
2
2
Take drinking water in a clean container and mix Tilefixo in the ratio of 1:4
3
3
Apply a thick layer of 3-6mm on the surface.
4
4
For a strong bond, use the mixture within 30 mins to fix the tiles.
5
While fixing wall tiles, start from the bottom and make your way up. Ensure there are no hollow gaps between the wall and tiles.
5
While fixing wall tiles, start from the bottom and make your way up. Ensure there are no hollow gaps between the wall and tiles.
6
6
With Tilefixo you can even fix big natural tiles, like ceramic, marble and granite tiles, without any hassle.
For more expert home building solutions and tips,keep following #BaatGharKi by UltraTech Cement
Get In Touch
Get Answer To Your Queries
