Crack Codebreaker: Repairing Walls Like a Pro! Your Complete Guide to Crack Repairs!

How to fix cracks in walls ?

1) Repairing a crack in Drywall

Drywall is a specific type of wall panel made of gypsum plaster and sandwiched between two sheets of paper, which is a commonly used material for interior walls in many homes and buildings. So when discussing how to fix cracks in walls, this comes as no surprise to many because homeowners will encounter cracks in their drywall at some point. Luckily, fixing a small crack in drywall is a fairly easy process.

Following are the steps to repairing a crack in drywall :

1) Buy a joint compound that can either be premixed or ‘setting-type’

2) Cut a V-notch along the cracks you want to fix

3) Clean the area around the crack to remove debris or dust

4) Apply a thin layer of joint compound to the crack and spread it evenly

5) Keep applying as many coats as you feel necessary

6) Allow it at least 24 hours to dry out

7) Once dry, use sandpaper to smooth or dry out any rough spots or excess compound

8) Finish by painting over the area to match the surrounding wall

 

2) Repairing a crack in concrete wall

Concrete walls are often found in basements, garages, and other areas of a home, and cracks in these walls can be caused by a variety of factors, including settling of the foundation, temperature changes, or water damage. Fortunately, repairing a crack in a concrete wall and concrete curing is also a relatively simple process.

Here are a few steps that can be followed to repair a crack in concrete wall :

1) Widen the crack slightly with a chisel or hammer

2) Clean the area around the crack with a wire brush to remove any loose debris

3) Use a bonding adhesive to prime the cracked area with an old paintbrush

4) Apply multiple coats of the concrete patching with a putty knife by pressing them into the crack and making it level with
the rest of the wall

5) Finish by ensuring the repair matches with the rest of the wall

3) Repairing a crack in Plaster Wall

Plaster walls are often found in older homes and buildings, and cracks in these walls can be caused by a variety of factors, including settling of the foundation, temperature changes, or simply the natural aging of the plaster. Repairing a crack in a plaster wall requires a slightly different approach than drywall or concrete, but it's still a manageable DIY project.

Here are a few steps to follow when repairing a plaster wall :

1) Start by pressing gently over the wall to see if the plaster moves or comes apart

2) Clean the area and widen the crack using a putty knife

3) Spread ready mixed or setting type joint compound over the crack and fill it completely

4) Considering the size of the crack if large, a self-adhesive fibreglass mesh tape must be applied before plaster

5) Apply a few layers of compound (maybe 2 or 3) over the taped area

6) Finally paint over the patched area to match the rest of the wall

Also Read : How to Calculate Water Cement Ratio ?