Biogas plant building tips

Biogas is a better replacement to conventional sources of energy. It's a clean fuel, produced from bacteria in bio waste. This helps to keep the earth clean from harmful emissions . Biogas is an efficient ideal way to ensure that all areas have access to electricity.

Let's learn how a Biogas plant is built.

1
Begin by digging an underground digester tank according to your requirements and fill it with a layer of aggregates. After that, lay a 15 cm thick concrete digester foundation over it.

2
Then, complete the brickwork of the tank and add a dividing wall in it.

3
Raise a dome ceiling over the digester tank. It is typically made of concrete or metal. A gas pipe comes out of this dome, which is regulated by a valve.

4
Create a feeder pit in the ground, next to the digester tank. Water and biowaste enter the digester tank through this pit.

5
Dig an overflow tank on the opposite side.

6
Bacteria decompose the bio-waste to create biogas in the tank. Owing to the pressure, excess slurry flows into the overflow tank.

7
The slurry can be removed and used as fertilizer for plants.

8
The gas is delivered to the kitchen
via a connecting pipe. It can be
used for cooking and other
purposes.

These were a few things about building
a Biogas plant.

For more expert home building solutions and tips,keep following #BaatGharKi by UltraTech Cement

Get In Touch

Get Answer To Your Queries

Enter a valid name

Enter a valid number

Enter a valid pincode

Select a valid category

Enter a valid sub category

By submitting this form you are authorizing UltraTech Cement to contact you.

Please check this box to proceed further

Biogas plant building tips

Let's learn how a Biogas plant is built.

1
Begin by digging an underground digester tank according to your requirements and fill it with a layer of aggregates. After that, lay a 15 cm thick concrete digester foundation over it.

2
Then, complete the brickwork of the tank and add a dividing wall in it.

3
Raise a dome ceiling over the digester tank. It is typically made of concrete or metal. A gas pipe comes out of this dome, which is regulated by a valve.

4
Create a feeder pit in the ground, next to the digester tank. Water and biowaste enter the digester tank through this pit.

5
Dig an overflow tank on the opposite side.

6
Bacteria decompose the bio-waste to create biogas in the tank. Owing to the pressure, excess slurry flows into the overflow tank.

7
The slurry can be removed and used as fertilizer for plants.

8
The gas is delivered to the kitchen
via a connecting pipe. It can be
used for cooking and other
purposes.

For more expert home building solutions and tips,keep following #BaatGharKi by UltraTech Cement

Get In Touch

UltraTech

Products

Guide to Home Building

Biogas plant building tips

Let's learn how a Biogas plant is built.

1Begin by digging an underground digester tank according to your requirements and fill it with a layer of aggregates. After that, lay a 15 cm thick concrete digester foundation over it.

2Then, complete the brickwork of the tank and add a dividing wall in it.

3Raise a dome ceiling over the digester tank. It is typically made of concrete or metal. A gas pipe comes out of this dome, which is regulated by a valve.

4Create a feeder pit in the ground, next to the digester tank. Water and biowaste enter the digester tank through this pit.

5Dig an overflow tank on the opposite side.

6Bacteria decompose the bio-waste to create biogas in the tank. Owing to the pressure, excess slurry flows into the overflow tank.

7The slurry can be removed and used as fertilizer for plants.

8The gas is delivered to the kitchen via a connecting pipe. It can be used for cooking and other purposes.

For more expert home building solutions and tips,keep following #BaatGharKi by UltraTech Cement

Get In Touch

UltraTech

Products

Guide to Home Building

1
Begin by digging an underground digester tank according to your requirements and fill it with a layer of aggregates. After that, lay a 15 cm thick concrete digester foundation over it.

2
Then, complete the brickwork of the tank and add a dividing wall in it.

3
Raise a dome ceiling over the digester tank. It is typically made of concrete or metal. A gas pipe comes out of this dome, which is regulated by a valve.

4
Create a feeder pit in the ground, next to the digester tank. Water and biowaste enter the digester tank through this pit.

5
Dig an overflow tank on the opposite side.

6
Bacteria decompose the bio-waste to create biogas in the tank. Owing to the pressure, excess slurry flows into the overflow tank.

7
The slurry can be removed and used as fertilizer for plants.

8
The gas is delivered to the kitchen
via a connecting pipe. It can be
used for cooking and other
purposes.